Materials
Carrier material Tin-plated steel (1.0330)
Intermediate layer Sintered bronze
Sliding surface/layer Acetal resin / POM
Product properties
Maintenance requirements Low maintenance
Specific static load capacity ≤ 250 N/mm²
Specific load capacity dynamic ≤ 140 N/mm²
Sliding speed ≤ 2.5 m/s
Coefficient of friction 0.04 to 0.12
Temperature load -40 to +130 °C
Max. PV value 2.8 N/mm² xm/s
Tolerance specifications
Housing bore diameter H7
Bushing inner diameter after installation D9 to D10
Shaft tolerance h8
Shaft material
Material Steel, hardened or unhardened, surface roughness ≤ Rz 4 – 6
Installation instructions
Housing bore Mounting chamfer, approx. 1.5 mm x 15 to 45°
Shaft Installation chamfer, 5 mm x 15°, edges rounded.
Press-fit mandrel The use of a suitable press-fit mandrel is recommended. Lubricating the outer surfaces may be necessary during installation
Gluing in The adhesive must not touch the sliding surfaces
POM-MET® cylinder liner
Suitable for grease or oil lubrication and all sliding movements, good load-bearing capacity, robust and dirt-resistant.
POM-MET is a low-maintenance composite plain bearing with a POM coating. Initial lubrication is required. Both oil and grease lubrication are possible. Thanks to the lubricant reservoirs, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load-bearing capacity, robust, and resistant to dirt.
